Allelectro Inconnects Private Limited

Carlo Gavazzi Solid State Relay RM1D060D1 SSR RM DC 60V 10A DC IP DC-DC SSR 10A Make Carlo gavazzi
RM1D060D101-pole panel mount SSR, DC switching, Operating voltage (Ue): 1 - 60 Vdc, Rated current (Ie): 10 Adc, Control voltage (Uc): 4 - 32 Vdc, Built-in overvoltage protection

Main features
• Low power dissipation output MOSFET
• 100 ADC maximum output current up to 60 VDC
• 50 ADC maximum output current up to 200 VDC
• 10 ADC maximum output current up to 500 VDC
• Switching frequency up to 1000 Hz
• 4-32 VDC control voltage range
• LED for control presence indication
• Clip-on IP 20 protection cover
• Self-lifting terminals
• Housing free of moulding mass

Description

The RM1D series expands Carlo Gavazzi’s range of DC solid state switching solutions up to 100 A for supply voltages up to 60 VDC, up to 50 A for supply voltages of maximum 200 VDC and up to 10 A for supply voltages of maximum 500 VDC. This new range is suitable for panel mounting or for mounting on a heatsink. The switching of the RM1D is controlled by a DC voltage in the range of 4 to 32 V. An LED indicates control voltage presence on the SSR.

The RM1D is the ideal solution when switching response times, from ON to OFF and vice versa, are critical to the application. Being fully solid state, the RM1D is the obvious choice for applications necessitating a high number of switching cycles since the SSR lifetime is not compromised by such switching.

Applications

DC heaters, solenoid valves, test equipment, connection and disconnection of battery sources.

Main functions

• DC switching solid state relay with 3750 Vrms isolation between input and output
• Fast response times to switch ON and OFF
• Fully solid state to ensure trouble free operation over a high number of switching cycles 

Carlo Gavazzi Solid State Relay RM1E48AA100 SSR AS 480V 100A 4-20MA
RM1E48AA1001-pole panel mount SSR, Proportional control (Phase angle), Operating voltage (Ue): 200 - 550 Vac (1200 Vp), Rated current (Ie): 100 Aac, Input: 4 - 20 mAdc, Built-in overvoltage protection

Main features
• AC Solid State Relay• Analog switching (phase-angle control) for resistive and slightly inductive load applications• 4 - 20 mA or 0 -10 V control input• Rated operational current: 25, 50, 100 and 125 AACrms• Rated operational voltage: Up to 600 VACrms• Variable intensity LED-indication according to input current• Integral snubber network• Polarized lockable control connector for safe connection for voltage controlled version

Description
The analog switching relay works in accordance with the phase angle control principle, i.e., the output switching point  in the AC sine wave depends on the control input which can be either 4-20 mA or 0-10 VDC.

4 mA or 0 VDC corresponds to zero output power whilst 20mA or 10 VDC corresponds to full output power (near linear power response). The relay switches off every time the output current crosses zero and switches ON in accordance with the applied control input.

Applications

Plastic injection machines, Extrusion machines, Blow moulding machines, Thermoformers, Dryers, Electrical ovens,Fryers, Shrink tunnels, Air handling units, Sterilisation equipment, Climatic chambers, Ovens and furnaces, Ambient heating.

Carlo Gavazzi Solid State Relay  RM1E48AA50 SSR AS 480V 50A 4-20MA Make Carlo Gavazzi
RM1E48AA501-pole panel mount SSR, Proportional control (Phase angle), Operating voltage (Ue): 200 - 550 Vac (1200 Vp), Rated current (Ie): 50 Aac, Input: 4 - 20 mAdc, Built-in overvoltage protection

Description
The analog switching relay works in accordance with the phase angle control principle, i.e., the output switching point in the AC sine wave depends on the control input which can be either 4-20 mA or 0-10 VDC.

4 mA or 0 VDC corresponds to zero output power whilst 20mA or 10 VDC corresponds to full output power (near linear power response). The relay switches off every time the output current crosses zero and switches ON in accordance with the applied control input.

Main features
• AC Solid State Relay• Analog switching (phase-angle control) for resistive and slightly inductive load applications• 4 - 20 mA or 0 -10 V control input• Rated operational current: 25, 50, 100 and 125 AACrms• Rated operational voltage: Up to 600 VACrms• Variable intensity LED-indication according to input current• Integral snubber network• Polarized lockable control connector for safe connection for voltage controlled version

Applications

Plastic injection machines, Extrusion machines, Blow moulding machines, Thermoformers, Dryers, Electrical ovens,Fryers, Shrink tunnels, Air handling units, Sterilisation equipment, Climatic chambers, Ovens and furnaces, Ambient heating.